universal ac input protections:short circuit/over load/over voltage built-in active pfc function, pf>0.93 led indicator for power on built-in constant current limiting circuit low profle: 33mm thickness fixed switching frequency at pfc:67khz pwm:134khz model number output volts output amps ripple & noise min load dc volt adjust load reg effciency single output sp100-3.3 3.3 volts(dc) 20 amps 100mv pk-pk 0~20amps 3.14~3.63volt(dc) 1.0% 70% sp100-5 5 volts(dc) 20 amps 100mv pk-pk 0~20amps 4.75~5.5volt(dc) 1.0% 76% sp100-7.5 7.5 volts(dc) 13.5 amps 100mv pk-pk 0~13.5amps 7.13~8.25volt(dc) 1.0% 78% SP100-12 12 volts(dc) 8.5 amps 100mv pk-pk 0~8.5amps 11.4~13.2volt(dc 0.5% 80% sp100-13.5 13.5 volts(dc) 7.5 amps 100mv pk-pk 0~7.5amps 12.8~14.9volt(dc) 0.5% 80% sp100-15 15 volts(dc) 6.7 amps 100mv pk-pk 0~6.7amps 14.3~16.5volt(dc) 0.5% 82% sp100-24 24 volts(dc) 4.2amps 150mv pk-pk 0~4.2amps 22.8~26.4volt(dc) 0.5% 84% sp100-27 27 volts(dc) 3.8 amps 150mv pk-pk 0~3.8amps 25.7~29.7volt(dc) 0.5% 83% sp100-48 48 volts(dc) 2.1 amps 250mv pk-pk 0~2.1amps 45.6~52.8volt(dc) 0.5% 82% 100w single output with pfc function sp100 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
input specifications input voltage range 90 ~ 264vac 120~370 volts(dc) frequency range 47-63 hz inrush current, typ: (cold start) 30amps / 230vac input current 1.7 amps. @ 115vac 0.8 amps. @ 230vac leakage current < 2mamps / 240vac min load see selection chart power factor @ fl pf> 0.93 / 230vac > 0.98 / 115vac output specifications voltage and current see selection chart line regulation 0.5% load regulation see selection chart voltage tolerance (note 2) 2.0%: 3.3~15volts(dc) 1.0%: 24~48volts(dc) ripple/noise (note 1) see selection chart hold up time 20ms @ fl setup, rise time 600ms, 30ms @ fl over voltage protection 3.63 ~ 4.46volt(dc): 3.3volts(dc) 5.5 ~ 6.75volt(dc): 5volts(dc) 8.25 ~ 10.13volt(dc): 7.5volts(dc) 13.2 ~ 16.2volt(dc): 12volts(dc) 14.85 ~ 18.23volt(dc): 13.5volts(dc) 16.5 ~ 20.25volt(dc): 15volts(dc) 26.4 ~ 32.4volt(dc): 24volts(dc) 29.7 ~ 36.45volt(dc): 27volts(dc) 52.8 ~ 64.8volt(dc): 48volts(dc) shut down o/p voltage,re-power over current protection 105 ~ 150% rated output power constant current limiting, auto-recover dc volt adjust see selection chart general specifications safety ul60950-1, tuv en60950-1 approved insulation resistance 100m? / 500volts(dc) emi compliance to en55022b (cispr22b) harmonic current compliance to en61000-3-2,-3 effciency see selection chart isolation 3000vac input - output 1500vac input - ground 500vac output - ground ems compliance to en61000-4-2, 3, 4, 5, 6, 8, 11; env50204,en55024, light industry level, criteria a environmental specifications oper. temperature -10c to +60c (see derate curve) storage temperature -20c to +85c, 10~95% rh relative humidity 20~90% rh non cond temperature coeffcient 0.05% / c (0-50c) mtbf 211.3khrs min,mil-hdbk-217f(25c) vibration 10~500hz, 2g10min./1cycle, period for 60min. each along x, y, z axes physical specifications size millimeters 179 x 99 x 45 inches 7.05 x 3.90 x 1.77 weight 23.28 oz (660g) note 1. ripple & noise are measured at 20mhz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 2. tolerance : includes set up tolerance, line regulation and load regula - tion. all specifcations are typical at nominal input, full load, and 25c unless other - wise noted 100w single output with pfc function sp100 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
100w single output with pfc function sp100 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
3815 100w single output with pfc function sp100 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
|